How To Stain Wood Floors Darker

April 02, 2021

Water popping is a process that opens the pores in the hardwood for more consistent stain penetration. Choosing wood floor stain colors that have orangey, honey or red tones is a great choice for subtly adding depth and enhancing the grain of the wood.

dark walnut stain on white oak hardwood Refinishing

Fill a spray bottle with 2 cups of water.

How to stain wood floors darker. The basic approach is a 6 step process: You can use the stain to darken the floor or to alter the hue. This will usually produce a darker coloring, but it adds a step to the process and slows production.

• substitute a glaze or gel stain for the liquid stain. The look is just as easily paired with classic furnishings as contemporary ones, though arguably the look is best suited to. We typically do 3 sandings, each with finer grits (the grits vary based on the type of wood and age).

That is, don’t wipe off all the excess stain. Honey toned hardwood floors create rooms that are warm and welcoming. For the steps, i applied gel stain on the step as well as the riser, and applied it to the second step and went back to the first area and wiped off.

In order to get a more even color and depth, plus a few shades darker, we go also go through a process called water popping when staining floors darker colors. When you do this, the wood essentially looks like new raw hardwood. Using excess amounts or applying multiple coats of stain can cause the stain to 'bleed back,' where it wicks back up to the surface of.

You can see how much darker the upper floor is compared to the steps. Starting in the far corner from the entryway, spread dark stain down over the floor, laying it on thickly and letting it pool. Now that you have chosen the right stain for your project’s wood, the next step is to clean the wood surfaces.

You can also use a whitewash stain to make the wood even lighter. This ensures your hardwood is smooth and that it properly accepts the stain and/or polyurethane for a better and longer lasting look. Image of redo hardwood floors yourself refinishing hardwood floors.

Glazes and gel stains usually contain a higher ratio of pigment. 4 options for changing the color of your hardwood floors. As long as you have healthy hardwood, you can sand and refinish it.

Work in sections as big as you can comfortably reach at once, letting the stain sit on the floor for about a minute and then wiping it up with paper towels. Clean unfinished wood with a damp rag before staining. The floor will not get darker if you flood it with an excess of stain or apply a second coat.

As i mentioned previously, i selected dark walnut for the stain color. Leave a dampness of stain on the wood that dries. If there are any swirls, cross grain scratches or patches of leftover lacquer, keep sanding by hand before applying darker stain.

Put on your rubber gloves. I shared this with you in my previous post, but here is the color of the floors in the downstairs (left) compared with the upstairs (right). For larger, darker stains, you can leave a hydrogen peroxide soaked towel over the area for a few hours and then remove and let dry.

The poly finish is satin. Lean down and let light reflect off the surface of the wood. I wanted to avoid orange undertones.

It will make the stain color look more even and it will allow you to do go a bit darker and deeper with very dark stains. I have had at least 25 conversations with Restoring hardwood floors without sanding refinishing hardwood via saigonmias.com.

My father in law is going to give me the hardest time for this post. How to stain wood how to apply wood stain and get an even finish using brush or rag technique youtube via youtube.com. I had a great rhythm going for each step.

You can add a glaze or coat to your hardwood floors to give them a darker color. A good method of staining hardwood floors darker without sanding is to apply the stain directly after screening, then cover it with clear finish. You can read a previous blog post about this process here:

The walnut color removed some of the orange tones and darkened the hardwood. He loves it so much. The amount of stain that a floor can absorb is finite;

The wood on my floors is red oak. How do you get stains out of hardwood floors without sanding? Another solution to make your floors look a bit darker is to do a water pop.

dark stain on original oak floors Oak wood floors, Dark