Minwax Polyurethane For Floors Drying Time

August 21, 2021

Hold can vertically 12 inches from surface. Protect adjacent areas from overspray.

Various types of clear coat finishes for wood, how to

Optimized drying technology results in faster recoat time between coats.

Minwax polyurethane for floors drying time. Superior durability for hardwood floors. Minwax 63010444 fast drying polyurethane clear finish, quart, satin. Has a 50% faster recoat time than other 350 v.o.c.

It provides long lasting protection and beauty to interior wood surfaces such as furniture, cabinets, doors and floors. After this time, you can walk on the surface or touch it. Is a durable, protective finish specifically formulated for use on hardwood floors.

Wet overspray can be removed with mineral sprits. Optimized drying technology results in faster recoat time between coats Picture was taken in decreasing light!) even though it does dry quickly, keep in mind that every finish needs time to “cure” and harden.

The dry time will vary based on such factors as environmental conditions, ventilation, type of wood, and the number of coats. First, the dry time is 3 to 4 hours, 25% faster than traditional poly. It states 3 hours drying time but as per consumers’ review, it is recommendable to keep it undisturbed for 24 hours.

Just as plywood gets its strength from layers of thin wood, so does a finish. This depends on the type of polyurethane you use, how you apply it, and what the external conditions are like. Apply a thin coat and maintain a wet edge to avoid lap marks.

Second, if you recoat within 12 hours, you don't have to sand between coats. It has an optimized drying technology because of its thin coat application which enables you to recoat faster thereby no wastage of time. Depress button fully and spray using an even, sweeping motion with slightly overlapping strokes.

No sanding required between coats. Thin coats dry faster, look better, and provide more durability. In addition to drying faster than standard polyurethane finishes, polyurethane for floors does not have to be sanded between coats, provided you apply next coat less than twelve hours later.

Shake for 10 seconds occasionally during use. The complete drying takes much longer. It provides slightly amber tone to the floor.

Stir in such a manner as to rotate the product from the bottom to the top of the can. Applying too much finish only results in runs, drips, or a thick layer that never completely dries or hardens.

Minwax 230054444 Fast Drying Polyurethane SemiGloss, 1/2